productphoto

DFRduino FIO (Arduino Compatible)(Discontinued)

SKU:DFR0069 Brand:DFRobot
$0.00
Discontinued
Categories: All Products
Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

Expected Restock Date: [[restockDate]]

Introduction

This DFRduino FIO is Discontinued Now, We recommend other best selling arduino boards as a suitable replacement.

The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO.  It is 100% compatible with original Arduino FIO.

Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby. 

Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable. Checkout our tutorial on wireless bootloading!

Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over an FTDI Basic Breakout, cable, or other serial connection.

Note: The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.

  

Features

  • ATmega328V running at 8MHz
  • Arduino Bootloader
  • XBee socket
  • Lithium Polymer battery compatible
  • MAX1555 LiPo Charger
  • Reset button
  • On/Off Switch
  • Status/Charge/RSSI LEDs
  

Specification

  • Size: 65x25x13 mm (2.6x1.0x0.5 in)
  • Weight: 10 gram


  

Documents

 

 


Shipping List

  • DFRduino FIO (Arduino Compatible)    x1

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ