Introduction
The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you need is just a digital signal, you can drive it directly. Besides, the LED is so bright that do not look directly at the light.
Specification
- Operating Voltage: 5VDC
- Opearting Current: 20mA (Max)
- Dimension: 30*22(mm)/1.18*0.86 (in)
Board Overview
Tutorial
Requirements
- Hardware
- UNO x1
- Bright LED Module x1
- Some wires
- Software
- Arduino IDE Click to Download Arduino IDE from Arduino®
Connection Diagram
Sample Code
Result
This simple sample code will turn on and off this LED module every one second. And the brightness is depend on the voltage it gets from Arduino. (Maximum is 5V.)
FAQ
For any question/advice/cool idea to share, please visit DFRobot Forum.