Nova Manufacturing shields

Jose 2014-05-23 23:41:56 7745 Views5 Replies
Howdy,

Here are a few treats for all of you playing with Nova. If you are thinking about making a Nova shield and not sure where or how to start, here is a good point.
The attached files include the pin positioning and measurements. Grab'em and modify for your own project as required.
Ask any questions about Nova designing here.

2014-06-25 16:50:55 the equivalent amount that the nova board has
which is 1x13, 1x7 and 1x5 chle

2014-06-19 22:11:47 Sorry, checked but they are different, won't fit. I'll dig around see if I can find the headers..
How many do you need? Jose

2014-06-19 16:13:55 would it fit on top of the nova kit? chle

2014-06-16 21:22:23 would these do?
[url=http://www.dfrobot.com/index.php?route=product/product&filter_name=xbee&product_id=547#.U55-6fmSzrg]http://www.dfrobot.com/index.php?route=product/product&filter_name=xbee&product_id=547#.U55-6fmSzrg[/url] Jose

2014-06-16 06:10:42 Hi,

I was wondering if you know which retailers can provide 5, 7 and 13 pin headers that have a pin-pinch of 1.27mm as shown in your diagram? chle