Forum >FIT0186 - 12V DC Motor 251rpm w/Encoder
FIT0186 - 12V DC Motor 251rpm w/Encoder
Account cancelled 2013-05-22 07:09:45 5468 Views2 Replies I was wondering if anyone using the FIT0186 - 12V DC Motor 251rpm w/Encoder could let me know what the continuous current and stall current ratings are. Thanks.
2013-08-08 13:47:07 now i'm confused
i had the same question but saw this thread too late.
So phoebe told me stall current is 6,5A.
[url=https://www.dfrobot.com/forum/index.php?topic=865.msg4037;topicseen#new]https://www.dfrobot.com/forum/index.php?topic=865.msg4037;topicseen#new[/url]
Which value is correct ?
best regards
Rob rob0
i had the same question but saw this thread too late.
So phoebe told me stall current is 6,5A.
[url=https://www.dfrobot.com/forum/index.php?topic=865.msg4037;topicseen#new]https://www.dfrobot.com/forum/index.php?topic=865.msg4037;topicseen#new[/url]
Which value is correct ?
best regards
Rob
rob0 2013-05-23 00:29:34 Hi ET,
we just checked with 12V and the stall current is 3.7A. The idle current is in a range of 300mA and it should be save to run it with a continuous current of 1.5 to 2A
lumi
we just checked with 12V and the stall current is 3.7A. The idle current is in a range of 300mA and it should be save to run it with a continuous current of 1.5 to 2A
lumi 