SHT20 I2C temperature & humidity sensor - location for best results?
bensont 2019-04-30 23:40:38 2796 Views3 Replies Hello all,
I am currently developing a drive-by environmental sensing platform and we are using the humidity / temperature sensor in this device.
https://wiki.dfrobot.com/SHT20_I2C_Temp ... U__SEN0227
my question is how much of the sensor should be exposed to generate the best results. If see picture attached is what we have it at the moment, but wondering people thoughts, does it need to be as far out as we have it?
Thanks,
Tom
http://senseable.mit.edu/cityscanner/
I am currently developing a drive-by environmental sensing platform and we are using the humidity / temperature sensor in this device.
https://wiki.dfrobot.com/SHT20_I2C_Temp ... U__SEN0227
my question is how much of the sensor should be exposed to generate the best results. If see picture attached is what we have it at the moment, but wondering people thoughts, does it need to be as far out as we have it?
Thanks,
Tom
http://senseable.mit.edu/cityscanner/
