Forum >iphone pair wirh BlUNO NANO
iphone pair wirh BlUNO NANO
bzhou 2020-01-07 06:14:41 5740 Views5 Replies Hi
I am very new to Bluetooth and Arduino. I just bought two BLUNO NANOs. I want to use Play BlUno app in my iPhone to play the BLUNO NANO. However the Play BlUno cannot find the BLUNO NANO. I also tried app MobileGrid, still cannot find any device.
I checked the firmware version of the NANO, it is v1.97. I used external power (7V) for the NANO.
Do I have to do something in the NANO, like any setup, or firmware updating?
I'd appreciate to any suggests and advice.
Bo
I am very new to Bluetooth and Arduino. I just bought two BLUNO NANOs. I want to use Play BlUno app in my iPhone to play the BLUNO NANO. However the Play BlUno cannot find the BLUNO NANO. I also tried app MobileGrid, still cannot find any device.
I checked the firmware version of the NANO, it is v1.97. I used external power (7V) for the NANO.
Do I have to do something in the NANO, like any setup, or firmware updating?
I'd appreciate to any suggests and advice.
Bo
2021-12-23 22:08:57 Connecting an Arduino to an iOS device needs both hardware and software. Use Redpark serial cable, plugs one end directly into an iOS device, and at the other plugs into the RS232 to TTL adapter, which in turn connects to the Arduino. You also need a well-perform Mac to do it. To ensure your Mac performs well, you should check its status including RAM, CPU, etc. Make sure you have cleared your Mac's other storage. stanleyswells
stanleyswells 2020-01-20 11:42:42 Where is an article like "Bluno Beetle Simple Tutorial" to set-up the Arduino to work with PlayBluno on an iPhone? jeff
jeff 2020-01-08 08:43:08 Hello,
Thank you for your response. In fact I have read the wiki page for several times. I configured BLE for my two BLUNO NANOs, uploaded the sketches with PC (Arduio IDE in PC). Now the two boards can communicate each other via BLE. But I don't understand the section of Bluno Basic Demo in the wiki page. I don't know where the interface BLE Sample come from, or how to create it. I tried searching the "BlunoBasicDemo" in my iPhone, but I didn't find anything that can download/install. Do I have to download Arduino IDE in my phone? Thank you.
Bo bzhou
Thank you for your response. In fact I have read the wiki page for several times. I configured BLE for my two BLUNO NANOs, uploaded the sketches with PC (Arduio IDE in PC). Now the two boards can communicate each other via BLE. But I don't understand the section of Bluno Basic Demo in the wiki page. I don't know where the interface BLE Sample come from, or how to create it. I tried searching the "BlunoBasicDemo" in my iPhone, but I didn't find anything that can download/install. Do I have to download Arduino IDE in my phone? Thank you.
Bo
bzhou 