Help with HDT20 V1.0

Yovav.Gur Ari 2023-02-14 12:32:16 744 Views3 Replies
Hello,
I received HDT20 V1.0.
looking at the board facing to the sensor, pins are marked from left to right:
Pin 1 D, (wire color Green).
Pin 2 C, (wire color blue).
Pin 3 - (wire color black).
Pin 4 + (wire color red).
The manual shows:
1 VDD Power supply (2.2v to 5.5v).
2 SDA Serial Data Bidirectional port.
3 GND Ground.
4 SCL Serial clock Bidirectional.
Can anyone help me with this issue? Which is the right?

Thank you very much.
Yovav

2023-02-22 23:12:49

At one discussion forum, it was stated that Connexx TVs were made by Furrion. So far we have not been able to verify that comment. https://www.techy2tech.com/who-makes-connex-tv/

tor.ikk

2023-02-22 09:23:06

Unfortunately, no orders on the board.

Thanks for trying.

Yovav.Gur Ari

2023-02-20 16:58:05

Please refer to the order on the board.

Hope it can help.

Tonny12138