HOME COMMUNITY FORUM WIKI BLOG LEARN
Forum >specs of the Arduino I/O
General LattePanda

specs of the Arduino I/O

userHead Ioan.Farcas 2023-08-25 00:40:58 872 Views4 Replies

hello:

I would like to receive more info on the Arduino I/O specs, like max. currents of the outputs, max. curents of the Voltage pins,  type of the inputs and outputs ( PNP, NPN) and so on…

2023-10-28 15:48:15

i found what i had seen before: https://docs.lattepanda.com/content/3rd_delta_edition/drivers_and_software/ 

 

 userHeadPic Karl.Jung
2023-10-28 15:21:59

i too am looking the pages i have seen before but cannot find now… I hope i made copies. i do seem to remember reading that it is the df robot flavor of leonardo. now i am doubting myself… 

 userHeadPic Karl.Jung
2023-08-25 01:32:35

Chip and boot loader are all Leonardo, it's 5v mcu, 40mA max current output. There are no PNP or NPN, just GPIO.

 

For more Lattepanda questions, you could move to the Lattepanda forum (https://www.lattepanda.com/forum/?t=876&p=1).

 userHeadPic Afra
2023-08-25 00:45:00

the above topic  request is for Lattepanda 3Delta 864

 userHeadPic Ioan.Farcas
basehead
Register Login
p.name LattePanda 3 Delta 864 - Pocket-sized Windows / Linux Single Board Computer (8GB RAM/64GB eMMC) DFR0981