SKU_SEN0539 not able to read I2C register
![userHead](https://dfimg.dfrobot.com/dfPortrait2.png)
Hi,
I am using SKU_SEN0539 connected using I2C interface to TI CC26x2R1 Launchpad. I ported the SKU_SEN0539 driver library to work with TI CC26x2R1 Launchpad. I confirm that I am able to write to SKU_SEN0539 using I2C interface to change volume. However, reading registers such as DF2301Q_I2C_REG_WAKE_TIME 0x06 and DF2301Q_I2C_REG_CMDID 0x02 fails. I always read 0 value.
![](https://dfimg.dfrobot.com/663df9c4aa9508d63a43b0c3/enshopforum/b91a3a5a0897124113b237bd7de016c6.jpg)
Regards,
Markel
2024-05-12 18:14:59
mtrobregado
Hi,
I bought a Arduino to test this. Using Arduino Uno the I2C mode works but UART does not work.
Regards,
Markel
![userHeadPic](https://dfimg.dfrobot.com/dfPortrait2.png)