Forum >After a long measurement period, my gas sensor returns data of 0 ppm or beyond the range?

After a long measurement period, my gas sensor returns data of 0 ppm or beyond the range?

Tonny12138 2024-11-29 10:18:25 153 Views1 Replies
After a long measurement period, my gas sensor returns data of 0 ppm or beyond the range?

2024-12-31 10:19:07

Please check if the version of your adapter board is V1.0. There is a hardware bug on some of the V1.0 board that could cause this problem.

Please turn to our TechSupport team for the after-sale service.

Tonny12138

Rich Text Editor

Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART) SEN0466

Gravity: Factory Calibrated Electrochemical Oxygen / O2 Sensor (0-25%Vol, I2C & UART) SEN0465

Gravity: CL2 Sensor (Calibrated) - I2C & UART SEN0468

Gravity: NH3 Sensor (Calibrated) - I2C & UART SEN0469

Gravity: Factory Calibrated Electrochemical SO2 Sensor (0-20ppm, I2C&UART) SEN0470

Gravity: Factory Calibrated Electrochemical Ozone Sensor (0-10 ppm, I2C & UART) SEN0472

Gravity: Factory Calibrated Electrochemical Hydrogen Sensor (0-1000ppm, I2C&UART) SEN0473

Gravity: HCL Sensor (Calibrated) - I2C & UART SEN0474

Gravity: HF Sensor (Calibrated) - I2C & UART SEN0475

Gravity: PH3 Sensor (Calibrated) - I2C & UART SEN0476

Gravity: H2S Sensor (Calibrated) - I2C & UART SEN0467

Gravity: Factory Calibrated Electrochemical Nitrogen Dioxide Sensor (0-20ppm, I2C&UART) SEN0471