Forum >XBEE SHIELD to ROMEO-ALL IN ONE CONTROLLER
XBEE SHIELD to ROMEO-ALL IN ONE CONTROLLER

Hi All,
I recently bought 4WD MOBILE PLATFORM with ROMEO ALL in ONE ARDUINO CONTROLLER along with XBEE SHIELD FOR ARDUINO (2 XBEEs and USB adapter). Can any one point me to an article that show me how to plugin the xbee shield to Romeo all in one or which pins on ROMEO can be used for connection this shield.
I did checkout the videos on this page but they are using a different controller.
http://www.dfrobot.com/index.php?route=product/product&path=45&product_id=409
XB Shield: http://www.dfrobot.com/index.php?route=product/product&product_id=61
ARDUINO Controller:http://www.dfrobot.com/index.php?route=product/product&path=35_38&product_id=56
XBEE: http://www.dfrobot.com/index.php?route=product/product&path=45&product_id=184
Thanks,
Venu
I recently bought 4WD MOBILE PLATFORM with ROMEO ALL in ONE ARDUINO CONTROLLER along with XBEE SHIELD FOR ARDUINO (2 XBEEs and USB adapter). Can any one point me to an article that show me how to plugin the xbee shield to Romeo all in one or which pins on ROMEO can be used for connection this shield.
I did checkout the videos on this page but they are using a different controller.
http://www.dfrobot.com/index.php?route=product/product&path=45&product_id=409
XB Shield: http://www.dfrobot.com/index.php?route=product/product&product_id=61
ARDUINO Controller:http://www.dfrobot.com/index.php?route=product/product&path=35_38&product_id=56
XBEE: http://www.dfrobot.com/index.php?route=product/product&path=45&product_id=184
Thanks,
Venu
2011-02-25 03:14:54 Oh, friend.
I just forgot to tell you that the XBEE Shield For Arduino is powered via 5v and gnd pins of the ICSP.However,the ICSP header location of the Romeo is not compatible with other boards.
So the shield would require some extra wiring.
[img]
BTW, I really prefer the IO Expansion Shield For Arduino(V5) compared with the XBEE Shield or the other shields. It's powerful. ;D
Lauren
I just forgot to tell you that the XBEE Shield For Arduino is powered via 5v and gnd pins of the ICSP.However,the ICSP header location of the Romeo is not compatible with other boards.
So the shield would require some extra wiring.
[img]
BTW, I really prefer the IO Expansion Shield For Arduino(V5) compared with the XBEE Shield or the other shields. It's powerful. ;D

2011-02-24 17:27:16 Thanks Lauren...are there any leds that light up when i hock it to the board....cos i don't see anything..
venuavula12
