Forum >GPS/GPRS/GSM Module V3.0 (SKU:TEL0051) - Sleep Mode?
GPS/GPRS/GSM Module V3.0 (SKU:TEL0051) - Sleep Mode?

I would like to know if there is a way to put the GPS/GPRS/GSM Shield into a sleep mode to save power.
I only want to send SMS messages very occasionally and want to save battery power as much as possible.
I would like to be able to turn off the shield or place it into sleep mode from the Arduino Uno.
Any advice would be appreciated.
Thanks.
Rupert.
I only want to send SMS messages very occasionally and want to save battery power as much as possible.
I would like to be able to turn off the shield or place it into sleep mode from the Arduino Uno.
Any advice would be appreciated.
Thanks.
Rupert.
2013-05-09 03:36:35 thank you Phoebe,
LOL, I wish I were ;D
sometimes, it's a little tricky
anyway, I understand a little more every day how it works, and I'll try to post tips and/or ideas if I think they could help .
alnath
LOL, I wish I were ;D
sometimes, it's a little tricky
anyway, I understand a little more every day how it works, and I'll try to post tips and/or ideas if I think they could help .

2013-05-07 21:27:48 @alnath
Hi alnath, thank you for sharing the information. Haha~~ i think you are the master of the GPS/GSM shield now :P
If you have some suggestions or ideas about the shield , welcome to tell us,anything will be OK. We will try best to improve it.
Thank you in advance. ;D
Best
Phoebe
Hi alnath, thank you for sharing the information. Haha~~ i think you are the master of the GPS/GSM shield now :P
If you have some suggestions or ideas about the shield , welcome to tell us,anything will be OK. We will try best to improve it.
Thank you in advance. ;D
Best

2013-05-07 03:17:12 Hello,
have a look here, page p.139 [url=http://www.simcom.us/act_admin/supportfile/SIM908_AT%20Command%20Manual_V1.01.pdf]http://www.simcom.us/act_admin/supportfile/SIM908_AT%20Command%20Manual_V1.01.pdf[/url]
hth,
alnath
have a look here, page p.139 [url=http://www.simcom.us/act_admin/supportfile/SIM908_AT%20Command%20Manual_V1.01.pdf]http://www.simcom.us/act_admin/supportfile/SIM908_AT%20Command%20Manual_V1.01.pdf[/url]
hth,
