productphoto

Gravity: IO Expansion Shield for Arduino V7.1

SKU:DFR0265 Brand:DFRobot Reward Points: 49
$4.90
In Stock
Topic: Arduino Gravity
* Model:
Quantity:
Expected Restock Date: [[restockDate]]

You have chosen:[[togetherChouseinfo.num]]

Total amount: [[currency]][[togetherChouseinfo.price]] [[togetherChouseinfo.price]][[currency]]

Introduction

If you are worried about the chaotic tangle of wires on a breadboard or intimidated by the trepidation of soldering holes on a perforated board, then you've come to the right place. Gravity, a set of electronic module interface specifications formulated by DFRobot, provides the solution you need. By utilizing the Arduino Gravity IO expansion board in conjunction with Gravity modules, you can effortlessly establish connections with a single cable. Whether analog, digital, or I2C modules, easily identified wiring colors liberate you from the tension that precedes every power-on moment. There is no need for wire strippers or soldering irons to experience the enchantment of Arduino. Furthermore, it is compatible with both the Arduino UNO R3 and Arduino UNO R4.

Moreover, this Arduino IO expansion shield has a range of features, such as wide voltage input, an Xbee module socket, a UART fast toggle switch, a 3.3V voltage selection jumper, and dedicated power protection for servos. These functionalities elevate the expandability of your Arduino to new heights.

Furthermore, using the Gravity IO expansion board does not imply the obligation to exclusively use Gravity modules. On the Gravity IO expansion board, it remains convenient to employ other non-Gravity modules by easily connecting them using DuPont wires.

Schematic diagram for using the expansion board

Interface diagram for using the expansion board


If you are using development boards such as ESP32, micro:bit, Raspberry Pi Pico, etc., you can also take a look at the Gravity IO expansion boards designed by DFRobot specifically for these boards.

Arduino MEGA2560:

   - Gravity: IO Sensor Shield For Arduino Mega2560

micro:bit:

   - IO Extender for micro:bit

Raspberry Pi Pico: Gravity:

  - Expansion Board for Raspberry Pi Pico

FireBeetle 2 ESP32-E:

   - Gravity: IO Shield for FireBeetle 2

Features

  • 3.3V/5V operating voltage select
  • Switch for wireless communication & programme
  • More Easily recognitive interfaces
  • Colorful header for illustrating digital or analog pins
  • Immersion gold surface

Specification

  • Input Voltage
  • 7-12V, PWR_IN
  • 4.8-6V, SERVO_PWR, depending on your servo
  • Compatible module voltage: 5V/3.3V
  • Support interface: I2C, SPI, Xbee (Xbee pro), Bluetooth, APC220

Projects

Project 1. How To Build Your Own MechaGodzilla Armor! 56 Days To Make Wearable Monster Suit Using EVA & Gears!
Introduction: This project made a MechaGodzilla Armor with EVA plastic and gears! You can not only walk in the armor but also use gears to control the mouth and hands of the monster!


Project 2. Spectrophotometer Experiment Based on AS7341 Spectral Sensor
Introduction: This project uses DFRobot AS7341 Spectral Sensor to make a simple spectrophotometer, and carry out an experiment to measure substance concentration in different solutions by collecting data, fitting curve, etc.

Spectrophotometer Experiment

Project 3. How to make a Smart Rock-Paper-Scissors Game Robot
Introduction: This project made a smart rock-paper-scissors robot and bring it to campus maker carnival.


Project 4. Build KnowFlow: automatic water monitor

Introduction: KnowFlow is the name of this water quality monitoring device, based on Arduino Uno. It can automatically monitor 5 parameters of water: pH, Temperature, Dissolved Oxygen, Electronic Conductivity, ORP.

Project 5. How to Make An Automatic Water Changing System
Introduction: This simple system detects water quality through simulation Gravity: Analog pH Sensor / Meter Kit For Arduino and Gravity: Analog Turbidity Sensor For Arduino, and supplies and drains water through the submerged pump and solenoid valve.

How to Make An Automatic Water Changing System

Documents

Shipping List

  • IO Expansion Shield for Arduino V7.1 x1

TUTORIAL

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ

Gravity: IO Expansion Shield for Arduino V7.1

$4.90
In Stock
Quantity:

BACK TO TOP