Powering the LattePanda Alpha from SATA Power?
jason 2019-07-04 18:15:03 3648 Views2 Replies I'm thinking of installing some of these inside my pc case. To power I was looking at the sata power spec and it supplies upto 54w on the 12v lines apparently see here http://www.playtool.com/pages/psuconnec ... .html#sata
(PSU is 1000w so plenty of power available)
What do people think safe or not? don't wanna fry them
(PSU is 1000w so plenty of power available)
What do people think safe or not? don't wanna fry them
2019-07-05 16:17:21 Do you mean use the DC port?
This is the port I am referring to http://docs.lattepanda.com/content/alph ... -connector.
Unfortunately the other community site is down there are lots of information with experiments on what power this port accepts by a user on there. I would reach out to them but not sure they on here
jason
This is the port I am referring to http://docs.lattepanda.com/content/alph ... -connector.
Unfortunately the other community site is down there are lots of information with experiments on what power this port accepts by a user on there. I would reach out to them but not sure they on here
jason 2019-07-05 13:54:17 for me, I will never do that 
the port is not design for power the whole board, so I don't know if the power manager unit support that,
So may be you will get an unpowered board or a fried one
Cain.Zhang
the port is not design for power the whole board, so I don't know if the power manager unit support that,
So may be you will get an unpowered board or a fried one
Cain.Zhang 