HOME COMMUNITY FORUM WIKI BLOG LEARN
Forum >Replies by Jeffrob
userhead Jeffrob
Replies （9）
  • Topic: GMR Board
    You Reply: Hello Jose,

    What other tasks planned for the Nanos?
    I understand that the Nano number two was scheduled for sensors! off there is no connector provided therefor!

    As I understand it, the GRM board does absolutely nothing, so use Arduinos Nanos and Atmeg alone without the GRM board, all pins of Nanos and Atmega are then available for use.

    Thank you to tell me how the GRM board is used by other users.

    I am very interested in  feedback.
    I am also looking for code for the engine management (PID).

    thank you in advance for your answers
  • Topic: GMR Board
    You Reply: Hello Jose,

    What other tasks planned for the Nanos?
    I understand that the Nano number two was scheduled for sensors! off there is no connector provided therefor!

    As I understand it, the GRM board does absolutely nothing, so use Arduinos Nanos and Atmeg alone without the GRM board, all pins of Nanos and Atmega are then available for use.

    Thank you to tell me how the GRM board is used by other users.

    I am very interested in  feedback.
    I am also looking for code for the engine management (PID).

    thank you in advance for your answers
  • Topic: GMR Board
    You Reply: Hello Jose,

    What other tasks planned for the Nanos?
    I understand that the Nano number two was scheduled for sensors! off there is no connector provided therefor!

    As I understand it, the GRM board does absolutely nothing, so use Arduinos Nanos and Atmeg alone without the GRM board, all pins of Nanos and Atmega are then available for use.

    Thank you to tell me how the GRM board is used by other users.

    I am very interested in  feedback.
    I am also looking for code for the engine management (PID).

    thank you in advance for your answers
  • Topic: GMR Board
    You Reply: Hello Grey,

    Thank you for your reply and the code for I2C coming ... I'll be patient
    To connect the 3 CPU on GMR board, I understood.
    But I would like to connect multiple sensors on the Nano 2 and I can not find the connectors for this purpose.
    The existing analog and digital connectors seem wired for atmega cpu and not for the Nano; unless I am mistaken.
    How do other owners of the GMR board they use?

    Thank you in advance for answers
  • Topic: GMR Board
    You Reply: Hello Grey,

    Thank you for your reply and the code for I2C coming ... I'll be patient
    To connect the 3 CPU on GMR board, I understood.
    But I would like to connect multiple sensors on the Nano 2 and I can not find the connectors for this purpose.
    The existing analog and digital connectors seem wired for atmega cpu and not for the Nano; unless I am mistaken.
    How do other owners of the GMR board they use?

    Thank you in advance for answers
  • Topic: GMR Board
    You Reply: Hello Grey,

    Thank you for your reply and the code for I2C coming ... I'll be patient
    To connect the 3 CPU on GMR board, I understood.
    But I would like to connect multiple sensors on the Nano 2 and I can not find the connectors for this purpose.
    The existing analog and digital connectors seem wired for atmega cpu and not for the Nano; unless I am mistaken.
    How do other owners of the GMR board they use?

    Thank you in advance for answers
  • Topic: GMR Board
    You Reply: good evening
    I just bought a GMR card and I can not find any documentation to use it.
    I look at the drawing and I have a few questions.
    1 - I have not found connectors designed to use the available pins on the Arduino Nano .. How do you do for it?
    2 - The Arduino Nano 2 is designed to manage the sensors; However I can not find the correpondants connectors (this falls in the previous point).
    3 - Does anyone know if there are code for managing 3 cpu I2C of GMR card and more generally for the overall management of the robot "HCR" [sensors, motors with encoders (PID, Speed, ...), camera ...].

    thank you in advance for your answers
  • Topic: GMR Board
    You Reply: good evening
    I just bought a GMR card and I can not find any documentation to use it.
    I look at the drawing and I have a few questions.
    1 - I have not found connectors designed to use the available pins on the Arduino Nano .. How do you do for it?
    2 - The Arduino Nano 2 is designed to manage the sensors; However I can not find the correpondants connectors (this falls in the previous point).
    3 - Does anyone know if there are code for managing 3 cpu I2C of GMR card and more generally for the overall management of the robot "HCR" [sensors, motors with encoders (PID, Speed, ...), camera ...].

    thank you in advance for your answers
  • Topic: GMR Board
    You Reply: good evening
    I just bought a GMR card and I can not find any documentation to use it.
    I look at the drawing and I have a few questions.
    1 - I have not found connectors designed to use the available pins on the Arduino Nano .. How do you do for it?
    2 - The Arduino Nano 2 is designed to manage the sensors; However I can not find the correpondants connectors (this falls in the previous point).
    3 - Does anyone know if there are code for managing 3 cpu I2C of GMR card and more generally for the overall management of the robot "HCR" [sensors, motors with encoders (PID, Speed, ...), camera ...].

    thank you in advance for your answers