Hello,

I have recently purchased the 24GHz Microwave Radar Sensor, and the output data I am receiving from the sensor differs from the output data described in the Sensor Module Description (https://wiki.dfrobot.com/24GHz_Microwave_Radar_Sensor_SKU:%20SEN0306#target_6). The output data I am receiving is shown below, and it can be seen that the start bits occur multiple times throughout the data, and the stop bit never occurs.

Here is the full array that has the output data:

[255, 255, 255, 0, 245, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 44, 1, 1, 1, 1, 1, 1, 1, 1, 18, 1, 1, 1, 1, 1, 1, 1, 1, 1, 8, 1, 1, 1, 1, 1, 10, 1, 1, 1, 1, 1, 1, 1, 255, 255, 255, 0, 245, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 44, 1, 1, 1, 1, 1, 1, 1, 255, 255, 255, 0, 245, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]

Attached in the file upload is the program used for the radar, which is the same as the provided code, except that it is printing the buffer_RTT values when a detection is made.

I would like to know why the output data is incorrect, and how to fix this. I believe that the output is overwriting itself, hence why the start bits keep appearing, but am unable to fix this, or find any solution online.

Kind regards,