I have recently purchased two FireBeetle 2 ESP32-UE (N16R2) IoT Microcontroller (16MB Fl., 2MB PS., Supports Ext Antenna, Wi-Fi & Bluetooth) and am trying to connect them to my Arduino IDE (2.3.4) from my MacBook Pro M1 via USB C. The IDE refuses to recognize the boards (both of them) as being connected.

I have a few of the older DFR0478 FireBeetle ESP32 IoT Microcontroller with 250+ ESP32 Tutorials (Supports Wi-Fi & Bluetooth) and they connect to the same USB port immediately with no issue. I can also connect an Arduino nano ESP32 board using the same cable as I use for the DFR1140 and it connects fine.

The following is what shows up under the system report for my Mac with the new boards. It appears to be seeing something, but the IDE isn't recognizing it…

USB 3.1 Bus:

Host Controller Driver: AppleT6000USBXHCI

USB Serial:

Product ID: 0x7522

Vendor ID: 0x1a86

Version: 2.64

Speed: Up to 12 Mb/s

Location ID: 0x02100000 / 1

Current Available (mA): 500

Extra Operating Current (mA): 0

I have added the board packages specified in the wiki as shown

What am I missing?