TOP
Quad DC Motor Driver Shield for Arduino
$14.90
SKU: DRI0039
Volume Discount
- $14.16 5+ items
- $13.41 10+ items
- $11.92 50+ items
Purchase this product and earn 149 reward points, which are tied to VIP membership program.
Learn More >
Gravity: IO Sensor Shield For Arduino Mega Due$9.90Details
Introduction
The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG motor driver chips, compared with the traditional L298N chip, efficiency is improved and the component size also greatly reduced. The chip doesn't heat in to the rated range, and a single path maximum output 1.2A continuous current. The module includes a built-in low voltage detection circuit and thermal shutdown protection circuit, which is safe and reliable. This module is suitable for all kinds of DIY production.
JavaScript display
 |
|
 |
 |
|
| Product Name | 2x1A DC Motor Shield for Arduino |
Micro:bit Driver Expansion Board |
Gravity: Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) |
Quad DC Motor Driver Shield for Arduino |
| SKU | DRI0001 |
DFR0548 |
DRI0023 |
DRI0039 |
| Chip |
L293B |
HR8833 |
DRV8825 |
TB6612FNG |
| Operating voltage |
5V DC | / | 3.3V/5V | 2.7~5.5V |
| Motor drive voltage | 7-12V DC |
3.5~5.5V DC |
8.2-45VDC | 2.5V-13.5V |
| Maximum drive current |
1A each way | 1.5A | 1.6A | 1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
| Motor drive using pins |
PIN4/5/6/7 (Arduino Controllor) |
/ | D4，D5，D6 D7，D8，D12 |
D3,4,5,6,7,8,11,12 |
| Dimension |
56x57mm |
63 x 58mm |
83*55*25mm |
52mm * 53mm |
| Weight (g) |
60 | 64 | 48 | 24 |
| Frequently used With |
FIT0278/FIT0503 |
|||
| Key Features |
With motor indicator |
8-way servo interface DC motor x4/stepper motor x2(multiplexed with motor interface) |
Full step, 1/2, 1/4, 1/8, 1/16, 1/32 step mode |
High-speed drive capability, can drive ordinary 2-phase stepper motor to 5000RPM, and drive quad DC at the same time |
 |
|
 |
 |
|
| Product Name | Gravity: IO Expansion & Motor Driver Shield |
Gravity: 2x2A Motor Shield for Arduino Twin |
TMC260 Stepper Motor Driver Shield |
2x2A DC Motor Shield for Arduino |
| SKU | DFR0502 |
DRI0017 |
DRI0035 |
DRI0009 |
| Chip |
TB6612FNG |
L298 |
TMC260 |
L298P |
| Operating voltage |
2.7~5.5V |
5V | 5V |
5V |
| Motor drive voltage | 12V (peak value) |
4.8 ～ 35V |
40V max |
6.5~12v(VIN Power Supply),4.8~35V (External Power Source) |
| Maximum drive current |
1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
up to 2A/channel |
up to 2A per motor coil |
2A |
| Motor drive using pins |
D4 D5 D6 D7 |
D10,11,12,13 |
/ | Pin 4,5,6,7 are used to drive two DC motor |
| Dimension |
68.5mm×53.3mm |
56x57mm |
55x55mm |
|
| Weight (g) |
36 | 35 | 35 | 60 |
| Frequently used With |
FIT0278/FIT0503 |
|||
| Key Features |
Integrated XBee Slot, XBee, WiFi Bee, Bluetooth Bee, I2C. |
Mirrored version of DRI0009. Drive pins: 10, 11, 12, 13 Not compatible with IO expansion board V7.1. The control port is four, which reduces the overhead of the Arduino digital ports, and easy to program. |
Suitable for driving bipolar stepper motors. SPI serial bus control or STEP/DIR signal control. Controllers such as Mega with full port expansion. 256 times microstep subdivision. |
Use mirror motor to drive DRI0017 to aviod the conflicts . Support PWM speed control. Support PLL advance speed control |
Specification
- VM Motor Power Supply: 2.5 V ~ 13.5 V
- VCC Logic Power Supply: 2.7 ~ 5.5 V
- Output Current: 1.2A continuous current (per channel)
- Start/Peak Current: 2A (continuous pulse) / 3.2A (single pulse)
- Arduino Control Port: Digital pins 3, 4, 5, 6, 7, 8, 11, 12
- Working Temperature: -20 ~ 85 ℃
- Dimensions: 53mm x 52mm/2.09 x 2.05'
- Weight: 24g
Documents
Shipping List
- Quad Motor Driver Shield for Arduino x1