CommunityForumWikiBlogLearn
TOP
image_#0_small
image_#1_small
image_#2_small
image_#3_small
image_#4_small
image_#5_small
image_#6_small
image_#7_small
image_#8_small
image_#9_small
image_#10_small

Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)

$7.90
SKU: DFR0928
Volume Discount
  • $7.70 3+ items
  • $7.60 5+ items
  • $7.40 10+ items
Purchase this product and earn 79 reward points, which are tied to VIP membership program. Learn More >
    Don't Miss Top Accessories
    • FireBeetle 2 ESP32-C6 IoT Development Board for Smart Home Control System
      FireBeetle 2 ESP32-C6 IoT Development Board for Smart Home Control System
      $5.90
      Details
    • Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE / Matter)
      Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE / Matter)
      $4.90
      Details
    • FireBeetle 2 ESP32-E IoT Microcontroller (32M / 512KB, Supports Wi-Fi & Bluetooth)
      FireBeetle 2 ESP32-E IoT Microcontroller (32M / 512KB, Supports Wi-Fi & Bluetooth)
      $8.90
      Details
    • FireBeetle ESP32 IoT Microcontroller with 250+ ESP32 Tutorials (Supports Wi-Fi & Bluetooth)
      FireBeetle ESP32 IoT Microcontroller with 250+ ESP32 Tutorials (Supports Wi-Fi & Bluetooth)
      $8.90
      Details
    IntroductionFeaturesApplicationsSpecificationDocumentsShipping List

    Introduction

    This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows to easily read full-color bitmaps from the SD card.

    The module provides users with two wiring methods: pin header wiring and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using an FPC cable. Plug and play, easy to wire. Besides, the display supports a low refresh rate and offers a good display effect and strong versatility.

    It can be used in applications like sensor monitoring and alarm, Arduino temperature monitor, fan controller, etc.

    Fermion: 1.8

    Connect Diagram


    Fermion: 1.8

    Features

  • 128x160 Resolution
  • SPI (4-wire) communication
  • Integrated with an SD card slot

    • Applications

  • Sensor monitoring and alarm
  • Arduino temperature monitor
  • Fan controller

    • Specification

  • Operating Voltage: 3.3 V - 5 V
  • TFT Viewing Angle: 120 degrees
  • Pixels: 128 columns x 160 rows
  • Communication: SPI
  • Interface Mode: GDI, pin header
  • Driver Chip: ST7735S
  • Full-screen Power Consumption: 0.11 W
  • MicroSD Slot x 1
  • Operating Temperature: -10℃ - +60℃
  • Display Area: 26 mm x 35 mm/1.02x1.38"
  • Module Dimension: 34 mm x 55 mm/1.34x2.17"
  • Mounting Hole Pitch: 29 mm/1.14", 50 mm/1.97"
  • Mounting Hole Size: 2 mm/0.08"

    • Documents

    Shipping List

  • Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout) x1
  • GDI Display Cable x1
  • 10P Pin Connector x1
    • More Arduino Related ProjectsArduino Tutorials
    Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)
    $0.00