productphoto

Gravity: SHT1x Temperature & Humidity Sensor (Discontinued)

SKU:DFR0066 Brand:DFRobot
$0.00
Discontinued
Categories: All Products
Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

Expected Restock Date: [[restockDate]]

Introduction

Note: Gravity: SHT1x Temperature & Humidity Sensor is discontinued now, we recommend Gravity: SHT31-F Digital Temperature and Humidity Sensor or Gravity: Analog SHT30 Temperature & Humidity Sensor as a suitable replacement.

Here is the most qualified Humidity and Temperature Sensor from DFRobot. Accurate, durable, highly compatible and easy to use, it has all the attributes of a superior sensor requires.

This sensor uses SHT1x sensor.  SHT1x is individually calibrated in a precision humidity chamber. The calibration coefficients are programmed into an OTP memory on the chip. These coefficients are used to internally calibrate the signals from the sensors. The 2-wire serial interface and internal voltage regulation allows for easy and fast system integration. The tiny size and low power consumption makes SHT1x the ultimate choice for even the most demanding applications.


This NodeMCU IoT project is a simple demonstration on how to send sensor data to the Internet. 
Hardware Needed:

Type Selection of Temperature Sensors
Name Gravity: I2C Non-contact IR Temperature Sensor For Arduino Gravity: Analog LM35 Temperature Sensor For Arduino Gravity: Waterproof DS18B20 Sensor Kit

Gravity: DS18B20 Temperature Sensor

Gravity: Analog High Temperature Sensor
SKU SEN0226 DFR0023 KIT0021 DFR0024 SEN0198
Operating Voltage 3.3V/5V 3.3V/5V 3.0V~5.5V 3.3V~5V 3.3V~5.5V
Operating Current 2.7μA 2.7μA <3μA <3μA 2.8μA
Operating Temperature -40℃~85℃ -40℃~150℃ -55℃~125℃ -55℃~125℃ 30℃~350°C
Range of temperature measurement 0℃~65℃ 0℃~100℃ -55℃~125℃ -55℃~125℃ -55℃~125℃
Precision of temperature measurement 0.01℃ 0.5℃ 0.5℃ 0.5℃ 0.5℃
Temperature deviation ±0.5℃ ±0.5℃ ±0.5°C ±0.5℃ ±0.5℃
Dimension 30*22(mm) 30*22(mm) 33*22(mm) 22*32(mm) 42*32*18(mm)
Interface Gravity-I2C Gravity-analog Gravity-digital Gravity-digital Gravity-digital
Data type Digit Digit Digit (unibus) Digit (unibus) analog
Price $8.80 $4.50 $8.00 $4.00 $13.90
Brief introduction

BMP280 Barometer sensor supports Arduino and can measure both temperature and atmospheric pressure.

It can be applied to enhance GPS navigation & coordinate with IMU sensor to realize indoor and outdoor navigation. Compared to the last generation BMP180 barometer sensor, it has a lower power consumption, higher resolution and higher sampling frequency.

Application: Enahnced GPS navigation (e.g. time-to-first-fix improvement, dead-reckoning, slope detection) Indoor navigation (floor detection, elevator detection) Outdoor navigation, leisure and sports applications Weather forecast Health care applications (e.g. spirometry) Vertical velocity indication (e.g. rise/sink speed)

$A Temperature Sensor can be used to detect ambient air temperature, the output voltage is proportional to temperature. It has good linearity and high sensitivity. 

Application:Medical treatments Personal controls Industrial controls Aeronautics and astronautics.

Waterproof temperature sensor DS18B20 is widely used in many fields, such as soil temperature measurement, hot tank temperature control etc. It supports multipoint measurement.

Application:

Constant temperature control Industrial system Consumer electronics Thermistors Refrigerators Barns Tanks Telecommunication rooms Power communication rooms

Cables etc.

A Temperature Sensor can be used to detect ambient air temperature. It can be connect to three-wire in parallel to achieve multipoint temperature measurement.

Application: Constant temperature control Industrial system Consumer electronics Thermistors Refrigerators Barns Tanks Telecommunication rooms Power communication rooms Cables etc.

It used a PT100 resistance type high temperature probe to measure a temperature range between 30-350°C.

Application: Especially for high precision of temperature measurements. Medical treatments Motors Industrials Temperature counts Resistance counts

Name Gravity: i2C BMP280 Barometer Sensor Infrared Thermometer Module Gravity:SHT1x Humidity and Temperature Sensor

Gravity: DHT11 Temperature Humidity Sensor For Arduino

DHT22 Temperature and Humidity Sensor
SKU SEN0206 SEN0093 DFR0066 DFR0067 SEN0137
Operating Voltage 3.3V~5V 3V~5V 3.3V~5V 3.3V~5V +5V
Operating Current 1.2mA 4mA~9mA 2μA 0.5mA~2.5mA 1.5mA
Operating Temperature -40℃~125 ℃ -10℃~50℃ -40℃~128.8℃ 0℃~50℃ -20℃-80℃
Range of temperature measurement -70.01℃~382.19℃ -33℃~220℃ -40℃~128.8℃ 0℃~50℃ -40℃-80℃
Precision of temperature measurement 0.5℃ 2℃(full range) 0.5℃ 2℃
Temperature deviation ±0.5℃ ±0.6℃ ±0.4°C ±0.1℃ ±0.5℃
Dimension 31.5*18(mm) 12*13.7*35(mm) 32*27(mm) 22*32(mm) 22*32(mm)
Interface Gravity-I2C Digitalx3 Gravity-2-wire digital Gravity-digital Gravity-digital
Data type Digit Digit Digit (unibus) Digit (unibus) Digit (unibus)
Range of humidity measurement NA NA 0-100%RH 20-90%RH 0-100%RH
Humidity deviation NA NA ±4.5%RH ±5%RH ±2%RH
Price $16.00 $49.00 / $5.20 $9.50
Brief introduction

non-contact measurement uses infra-red radiation to measure the temperature and does not require a direct touch. Additionally, this method of measurement can be read quickly and accurately. This module has a FOV of 35° Wave length 5.5um-14um

Application: Environmental monitor

Home automation Automobile electronics

Airline industry

Military

It is a long distance thermometer specially designed for a high sensitivity, high accuracy, low noise and low power consumption. Wave length:5um-14um This module has a FOV of  26.6°x 2 = 53.2°

Application:

Medical equipment Fire alarm systems telecommunications

It consists of 1 capacitive humidity module and 1 energy gap temperature module, perfect integration of 1 14bit A/D converter and 1 2-wire digital interface.

CMOSens technology makes it of advantages such as low power consumption, fast response, strong anti-jamming capacity etc.

Application:

Medical equipment

HVAC

Meteorology

Humidity regulator Dehumidifier

Tests and measurements

Automobile

Automatically control

This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages. Its signal transmission distance up to 20 meters. These features make it a variety of applications and even the most demanding applications.  

Application:
Medical equipment HVAC
Meteorology
Humidity regulator
Dehumidifier Tests and measurements
Automobile
Automatically control

It contains a resistive element and a sense of wet NTC temperature module. Compared to DHT11, it has smaller humidity deviation, faster response, stronger anti-interference ability and higher cost performance

Application:

Medical equipment HVAC

Meteorology Humidity regulator Dehumidifier

Tests and measurements
Automobile Automatically control

Specification

  • Chip: SHT10
  • Interface :Digital
  • Humidity Ranger:0-100%RH
  • Tempereature ranger: -40~128.8℃
  • Humidity accuracy:±4.5%RH
  • Temperature accuracy:±0.5℃(25℃)
  • Size: 32x27mm (1.26 x 1.1 in)
  • Weight:5 gram
  • Voltage:3.3V~5V

Improvement List

  • Wide voltage range from 3.3V to 5V
  • Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)
  • Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  • Icons to simplely illustrate sensor function 
  • High quality connector
  • Immersion gold surface

Documents

Shipping List

  • Gravity: SHT1x Temperature and Humidity Sensor x1
  • Digital Cable x2

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ