productphoto

1.75mm PLA (1kg) - Red(Discontinued)

SKU:FIT0292-R Brand:DFRobot
$0.00
Discontinued
Categories: All Products
Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

Expected Restock Date: [[restockDate]]

Introduction

This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic  3D printers. It comes with one spool that can be easily attached on 3D printer.
PLA is a wonderful filament. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.
 
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions. 
 
As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

Specification

  • Diameters: 1.75mm
  • Weight:1kg
  • PLA Parameter
    • Physical Property   Typical value 
    • Tensile Strength@Yield        46Mpa
    • Tensile Elongation@Break      20%
    • Flexural Strength            70Mpa
    • Flexural Modulus            3212Mpa
    • Notched lzod lmpact(23℃)   5.2kj/㎡
    • HDT@66psi                     58℃
    • density                     1.31g/cm3
    • MFR                        10-14g/10min
    • Accuracy              1.75±0.1mm 

Shipping List

  • 1.75mm PLA (1kg) - Red  x1

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ