Board with ESP32 - problem with SPI pinout
Account cancelled 2021-10-03 04:10:00 363 Views0 Replies Hello there!
I need to use additional device that connects through SPI but I don't really know which pins i should use to do this.
The pinout of the board described on the image is very confusing and I've searched some topics about ESP32, yet, there is always a pin or two that is not led out to the board.
So, is there a way to solve this problem so I can connect my device to SPI?
Mentioned board
https://wiki.dfrobot.com/e-Ink_Display_ ... KU_DFR0676
I need to use additional device that connects through SPI but I don't really know which pins i should use to do this.
The pinout of the board described on the image is very confusing and I've searched some topics about ESP32, yet, there is always a pin or two that is not led out to the board.
So, is there a way to solve this problem so I can connect my device to SPI?
Mentioned board
https://wiki.dfrobot.com/e-Ink_Display_ ... KU_DFR0676
