Forum >Replies by Feanur
Replies （8）
- You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem? - You Reply:
I bought the OBD II Adapter because I want control Leds. The idea ist that the car speed kontrolls the leds. I have used the PID_SPEED funktion but it does not work?
I use the Arduino Mega 2560 R3. I have connectet the yellow cable with Rx0 and the blue with Tx0. The green cable have i connectet to the GND at the ICSP and the red cable at the 5 V at the ICSP. Is this correct?
I have tryed the sample with the RPM on an Arduino UNO an it works. Where is my problem?