Forum >Replies by Wendy.Hu
Replies （20）
- Topic: Bluno M3 header file issueYou Reply: Hi
Did you put the library into your library files of IDE? And just a single file, dont include the other files. How do you put the files into the IDE library? - Topic: Bluno Nano Pairing ProblemYou Reply: Hi Andrew,
Sorry for your troubles. So far, our ble series products only support our own ble and our app, not support other brand ble. So its hard to connect your other devices to our app. In addition, the pair led is just for HID mode, if you want to build connection between two ble devices, only need the link led. And we only can search our bluno via the app on your phone, not the setting panel. More detailed info you can refer to our bluno FAQ: https://www.dfrobot.com/wiki/index.php/Bluno_SKU:DFR0267#FAQ - Topic: Upload issue with USB cableYou Reply: Hi
Sorry for the late reply. It sounds a little strange. Do you mean it works at another pc? But failed on your own pc, right? Did you try anoter IDE? Same problem? According to the error prompted, it seems the bootloader of the serial port lost. But if it works well on the other pc, it should be a good one. Waiting for your reply. - Topic: Bluno Basic Demo line lengthYou Reply: Hi Reidar,
Good day!
I got a reply from our R&D team and actually Bluno Basic Demo app is open source, we have released its source code for your further development. To some extent, the app is just an example to use, so far, we dont consider to develop an updated version app since it may need a long period. If you need, here is the app source code download link: https://www.dfrobot.com/forum/viewtopic.php?f=18&t=2620
Sorry, its a pity.
- You Reply: Hi
Sorry for the late reply. The 130 motor in the beginning kit is a very simple one, even we cant control it via PWM. There are only two modes-on/off, which can be controlled via a relay. Sorry, I am afraid we dont have the relevant parameters you need. Or do you mean you are buliding a robot? If so, maybe some other DC motors would be more suitable. - Topic: WIFIbee MT7681 PBYou Reply: Hi
Sorry for the late reply.
I got a reply from our R&D team that probably its the problem with the software, we will release the new version in the middle of May. Thanks for your patience.
- Topic: WIFIbee MT7681 PBYou Reply: Hi
Sorry for the late reply.
I got a reply from our R&D team that probably its the problem with the software, we will release the new version in the middle of May. Thanks for your patience. - You Reply: it will in stock about at the end of the month.
- You Reply: Give me you email address please. I will help you to remind them for a check probably there are lots of query casued some delay.
- Topic: Upload issue with USB cableYou Reply: Hi
Please make sure your board and serial port is correct. And do you mean this is your first use? Or the module worked well at the beginning? - Topic: DFPlayer BIG problemsYou Reply: Hi
Sorry for the late reply. It sounds like a little strange, I will do a test later, any update I will let you know . - You Reply: Hi
Do you mean when you try to press the button, then no feedback in the serial port, right? If so, did you choose the buad rate correctly? - Topic: sim808.h library has errorsYou Reply: Hi
Sorry for the late reply. May I know whats the code you are using? Could you give me a link? Since I searched the mainboard wiki but cant find some code you mentioned. - You Reply: Hi millersp,
So sorry for your bad experience. Could you give me your email address? I will check it for you from our lattepanda team. Which email did you send to? Actually, the lattepanda has their own forum and the related reply from our lattepanda team, not only mine. I will try my best to your problem - You Reply: Hi there are some arduino pin on lattepanda, if you want to control your shield, you might need a arduino controller. Just insert the shield into the arduino controller, then connect your arduino controller to lattepanda. Please refer to the lattepanda pin definition.
- Topic: lattepanda 4g+64g wifiYou Reply: Hi tharangamuditha01,
Sorry, I am afraid not since we dont have this version now. Maybe there will be an update in the near future. - Topic: lattepanda 4g+64g wifiYou Reply: Hi tharangamuditha01,
Sorry, I am afraid not since we dont have this version now. Maybe there will be an update in the near future. - Topic: lattepanda 4g+64g wifiYou Reply: Hi filippopairotti98
You can send email to this two eamil directly: [email protected]; [email protected] for your further query. if there are some problems indeed, we will help you to deal with your RMA. - Topic: lattepanda 4g+64g wifiYou Reply: Hi filippopairotti98
You can send email to this two eamil directly: [email protected]; [email protected] for your further query. if there are some problems indeed, we will help you to deal with your RMA. - Topic: WIFIbee MT7681 PBYou Reply: I will do some test to confirm the problem, it seems there are some problems indeed. I have give a feedback to our R&D team, I will let you know the further result.